News
November 2017 | ||
| 22 Nov 17 |  IODA Fellow receives award at Industrial Liaison ForumPavanakumar Mohanamuraly won the Engineering category of the Queen Mary University of London Industrial Liaison Forum Poster Competition. Pavanakumar was presented with his award for his poster on “Fast uncertainty quantification using multi-level adjoints.” [more] | |
| 1 Nov 17 |  IODA and Geminids Geometry Handling and Parametrisation WorkshopThe IODA project and the UKFN Special Interest Group on Numerical Optimisation coordinated by Jens-Dominik Mueller jointly organised a workshop with the EPSRC-funded Geminids project on Geometry Handling and Parametrisation at the CFMS in Bristol. Over 40 participants from academia and industry attended, with a large number of industrial presentations from ... [more] | |
October 2017 | ||
| 12 Oct 17 |  IODA at EUROGEN 2017Rejish Jesudasan presented his EU funded IODA research at the "INTERNATIONAL CONFERENCE ON EVOLUTIONARY AND DETERMINISTIC METHODS FOR DESIGN OPTIMIZATION AND CONTROL WITH APPLICATIONS TO INDUSTRIAL AND SOCIETAL PROBLEMS" in Madrid last month. Rejish made two presentations: "Surface Mesh Morphing Method for Handling Wing-Fuselage Intersections" and "Adjoint-based Aerodynamic Optimisation of ... [more] | |
August 2017 | ||
| 12 Aug 17 |  IODA Fellows present research in Okayama, JapanIODA EU Project Fellows attended the CAD Exhibition Conference on 12th of August in Okayama, Japan. Orest Mykhaskiv, Mladen Banovic and Salvatore Auriemma presented their paper entitled "NURBS-based and Parametric-based Shape Optimisation with Differentiated CAD Kernel". [more] | |
| 7 Aug 17 |  IODA Outreach @ Big Bang London Fair 6th July 2017IODA project ESRs Orest, Rejish, Kumar and Salvatore completed an outreach activity at the BigBang London Fair in Uxbridge College, London on 6th July 2017. The ESR's Rotor-Test-Stand was an eye catcher to the students who attended the event. The moment the rotors were set in motion they gathered around and ... [more] | |
June 2017 | ||
| 30 Jun 17 |  IODA research presented at ASME Turbo Expo 2017, North CarolinaIlias Vasilopoulos presented his paper "CAD-based Optimization of a Compressor Stator using Conventional and Adjoint-driven Approaches" at the ASME Turbo Expo 2017, Charlotte, NC, USA, June 26-30 2017. | |
| 21 Jun 17 |  IODA research presented at Science Day at University of Paderborn 21st June 2017Mladen Banovic presented his IODA research paper "Automatic Differentiation of a CAD System and its Application to Aerodynamic Shape Optimization" at Science Day hosted by the University of Paderborn. Researchers were challenged to present their work in a short time slot of three minutes. (https://www.eim.uni-paderborn.de/scienceday/) [more] | |
| 20 Jun 17 |  IODA Research Paper presented at ECCOMAS 2017Pavanakumar Mohanamuraly presented his IODA Research paper 'Adjoint-Assisted Multi-Level Approach for Quantifying Geometry-Induced Uncertainties in Robust Aerodynamic Shape Optimisation' at the 2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering 15-17 June 2017, Rhodes Island, Greece [more] | |
| 20 Jun 17 |  Orest Mykhaskiv presents CAD-based shape optimisation IODA researchOrest presented his paper 'CAD-based shape optmisation of the NASA CRM wing-body intersection using differentiated CAD kernel' at the 2017 AIAA AVIATION FORUM, in Denver, Colorado this month. | |
| 5 Jun 17 |  EU4FACTS: Evidence for policy in a post-fact world 26 September 2017EU4FACTS: Evidence for policy in a post-fact world 26 September 2017 - European Commission - Charlemagne Building - Brussels The interaction between science and policy has never been straightforward. But this relationship has been further complicated by the current post-fact debate. As the Commission's Vice-President, Frans Timmermans, noted recently, "a new ... [more] | |
May 2017 | ||
| 30 May 17 |  IODA Training 25 to 26 October 2017The next IODA Training event 'Parametrisation in Shape Optimisation, Topology to Shape Transition, Return to CAD' will take place during the week of 25th to 26th October 2017. This will take place in Bristol at the Centre for Modelling and Simulation The IODA Consortium Meeting will be on Tuesday 24th October 9... [more] | |
April 2017 | ||
| 18 Apr 17 |  IODA Training event: Transferable Skills II April 3 - 5 at Queen Mary University of LondonThe Transferable Skills Training took place during the first week of April in the new Graduate Centre. Sessions included Thesis Writing, Entrepreneurial Skills, Career Planning and Outreach Further details: http://ioda.sems.qmul.ac.uk/events/london2017/ [more] | |
March 2017 | ||
| 8 Mar 17 |  EU Horizon 2020 IODA Project Research presentationMladen Banovic presented his IODA research paper "TU Berlin Stator Optimisation with an Adjoint CFD Method and Differentiated CAD Kernel" at the GAMM 2017 conference which took place in Weimar, Germany from 6-10 March.(http://www.gamm2017.de/) [more] | |
| 7 Mar 17 |  CAD-Free Parameterization and Immersive VisualizationThe Soft Handle CAD-Free Parameterization tool is an important ingredient of the whole optimization workflow, because it undertakes to ensure smoothness in the surfaces of the shape to be optimized. Moreover, the results (sensitivity map, pressure field etc.) are visualized within IC.IDO, ESI’s immersive visualization tool, in which ... [more] | |
February 2017 | ||
| 17 Feb 17 |  Automatic Differentiation TrainingAll the IODA project Early Stage Researchers took part in Automatic Differentiation Training at the INRIA based in Sophia Antipolis in the south of France. This was presented by Laurent Hascoet from INRIA and Andrea Walther from the University of Paderborn. [more] | |
| 16 Feb 17 |  20th Euro AD Workshop at INRIA 16-17 February 2017Mladen Banovic presented his research paper "Applications of differentiated CAD kernel in industrial shape optimization" | |
January 2017 | ||
| 11 Jan 17 |  IODA Outreach Activity in Osijek, CroatiaMladen Banovic gave a one-hour presentation on “Automatic calculation of derivatives in C++ source codes and their application in an aerodynamic shape optimisation of CAD-based models” This was part of the volunteering-based educational program “CodeCamp”, organised by the IT community “Osijek Software City” from Croatia. (http://softwarecity.hr/) [more] | |
